Updated 2025.11.27
Binding review · Marker · 25-26 season

Comp junior 8 review

In-depth review of the Marker Comp Junior 8: DIN 2–8, TLT toe, Compact 3 heel, 85 mm brake, 830 g. Pros/cons, fit, setup tips, and comparisons to Look and Tyrolia.

Chassis

alpine
din range
28
051015
weight
830g
elastic travel
not published
brake widths
85mm
compatibility2 standards
ISO 5355GripWalk
Junior Alpine ISO 5355 Children; BSL 240–360 mm; not GripWalk/AT/adult soles
tags
junior
classAlpine
buildStainless steel AFD, steel springs, engineered plastics

The Marker Comp Junior 8 is a purpose-built alpine race binding for young skiers. With a DIN range of 2–8, a TLT junior toe, and Marker’s Compact 3 heel, it delivers a low, direct race feel with predictable retention and release. This is not a do‑everything kids’ binding; it is a focused, on‑piste tool for junior racers.

Who is it for?

  • U10 racers and heavier/stronger U8s training and racing on hard snow.
  • Parents/coaches who want consistent release, low stand height, and clean power transfer.
  • Not for: GripWalk kids’ boots, touring, or adult boot soles.

Specs explained

  • Type of binding: Alpine (junior race). Maximizes on‑piste power transfer; no walk function.
  • DIN range: 2–8. Ideal adjustability for light to mid‑weight juniors; enough headroom without over‑springing smaller athletes.
  • Elastic travel: Not specified (TLT toe + Compact 3 heel). The two‑linkage toe and Compact 3 heel enhance elastic retention and smooth release even without a published mm figure.
  • Brake width: 85 mm. Fits most junior carvers; check clearance on very narrow race waists (65–70 mm). A narrower brake or pro adjustment may be preferable.
  • Weight: 830 g (pair, stated). Light for a race‑oriented junior setup; helps keep swing weight down.
  • Compatibility: Junior Alpine (ISO 5355 Children), BSL 240–360 mm; not for GripWalk/AT/adult soles. Verify your boot’s sole norm.
  • Materials: Stainless steel AFD glide plate, steel springs, engineered plastics. Built for low friction release and durability.

On‑snow performance

  • Power and feel: Low stand height and a stout interface give a precise, “flat” race feel. Kids can set an edge quickly and hold line on firm ice.
  • Retention and release: The TLT toe keeps you in when loading the ski, while the stainless AFD and Compact 3 heel deliver predictable release when it counts.
  • Step‑in and reliability: Straightforward step‑in with classic alpine consistency; no GripWalk tolerance by design.

Setup and compatibility notes

  • BSL range 240–360 mm covers most junior boots. Always have mounting and DIN settings done by a certified shop.
  • Brake check: 85 mm can look wide on very narrow race skis—ensure proper clearance and no snow drag; consider a narrower brake or shop adjustment if needed.
  • Not GripWalk compatible: use junior alpine soles (ISO 5355 Children) or swap soles where available.

Comparisons

  • Tyrolia SX 7.5 AC (DIN 2–7.5): Very accessible for ultra‑light kids; less top‑end margin than the Comp Junior 8.
  • Look SPX 10 GW JR (DIN 3–10): More heel elasticity and higher DIN for strong U12s; heavier and often GripWalk‑compatible—overkill for smaller racers.
  • Marker M 7.0 GW (DIN 2–7): Recreation‑leaning with GripWalk; less of a race‑focused interface than the Comp Junior 8.

Key takeaways

  • Race‑ready, low‑stack feel with direct edge power.
  • DIN 2–8 hits the sweet spot for U10/heavier U8 skiers.
  • Stainless AFD and TLT/Compact 3 design = consistent release.
  • No GripWalk; verify boot soles and brake clearance.
  • No published mm elastic travel, but on‑snow feel is stable.

Frequently asked questions

Q: Is the Marker Comp Junior 8 compatible with GripWalk kids’ boots?
A: No. It’s designed for junior alpine soles (ISO 5355 Children). Do not use GripWalk or touring soles, as they can compromise release and safety.

Q: What ski waist works with the 85 mm brake?
A: Up to about 80 mm is generally safe. On narrow race waists (65–70 mm), a narrower brake or professional adjustment can reduce drag and improve clearance.

Q: Who fits the DIN 2–8 range best?
A: Most U10 racers and heavier U8s. Always have a certified shop set the DIN based on weight, height, BSL, skier type, and terrain.

Q: Is it FIS‑conformant?
A: Some listings cite FIS conformity regarding stack height and release consistency. Confirm current rules with your race organization.

Verdict

For young athletes who need a low, direct, and trustworthy race interface, the Marker Comp Junior 8 is a standout. Get the boot and brake match right, and it delivers reliable retention and clean release in a light, easy‑to‑live‑with package.

Questions & opinions

No questions or opinions yet — be the first to ask.
    Your mood

    User reviews

    Have you skied this? Write a review →
    Recommended Productpartner
    Missing a hand while carrying ski gear?

    Missing a hand while carrying ski gear?

    A friend of mine created Clipstic, the easy way to attach your poles to your skis! Using this link you get 10% off as well as support for Pick-a-ski!

    Check it out!
    ReviewsPick-a-Ski