ATK Ready to skin 10 – Review

The ATK Ready to skin 10 (built on the Crest 10 platform) is a lightweight, full-featured tech touring binding for riders who want efficient uphill travel and confident downhill performance. At 295 g per binding, with a 4–10 release range and 12 mm heel elasticity, it balances climb efficiency, power transmission, and durability for intermediate to advanced tourers.

• Fast, glove-friendly handling: Easy Entry toe, Magneto heel flaps, and single-hand AP/EVO brake make transitions smooth.
• Predictable retention: Cam Release and 12 mm Elastic Response at the heel improve ski flex and help maintain consistent release.
• Versatility: Multiple brake widths (86–120 mm) and 20 mm BSL adjustment provide mounting flexibility and future-proofing.
• Snow management: Snow Pack Proof toe reduces ice build-up in the toe piece.

• Max RV 10: heavier or very aggressive skiers may prefer a higher range (e.g., ATK Raider 12).
• Ramp/delta feel: some skiers perceive a higher heel-toe delta; optional toe shims can flatten stance.
• Tech-only boots: requires tech-insert touring boots (not compatible with GripWalk or ISO 5355 alpine soles without inserts).

• Type of binding: Tech / Alpine Touring – frameless pin design; light for climbing with strong downhill capability in its class.
• DIN / release value: 4–10 – adjustable lateral and vertical release suitable for many tourers in the light-to-midweight category.
• Elastic travel: 12 mm (heel) – allows the ski to flex under load while maintaining retention, aiding comfort and control.
• Brake widths: 86, 91, 97, 102, 108, 120 mm – choose near-equal to ski waist or up to ~15 mm wider.
• Weight: 295 g per binding – very light for a braked binding, ideal for long days and big vert.
• Compatibility: Tech boots with inserts (ISO 9523) – requires toe and heel fittings; intended for touring skis.
• Materials: 7075 aluminum, stainless steel, POM – a durable, low-weight mix for precision and longevity.

• Marker Alpinist 10: lighter without brakes; with brakes weights are comparable. ATK adds heel elasticity and a slick brake system.
• Dynafit Radical: typically heavier but very user-friendly; ATK is lighter and snappier with modern ergonomics.
• Salomon/Atomic MTN: simple and reliable, often a touch heavier with brakes; ATK’s heel elasticity and brake operation stand out.
• ATK Raider 12: higher RV and freeride options (e.g., spacer) at a weight penalty; Ready to skin 10 is the lighter all-rounder.

• Brake sizing: match waist or go 5–15 mm wider. Overly wide brakes can snag; too narrow may not clear sidewalls.
• Heel gap and RV: set heel per ATK spec and adjust release to weight/skill; a shop release check is recommended.
• Keep the toe clean: clear ice/snow before stepping in for consistent retention.
• Consider toe shims: to neutralize delta if you prefer a flatter stance.

Q: What boots are compatible with the ATK Ready to skin 10?
A: Tech-insert touring boots (ISO 9523) with toe and heel fittings. Standard alpine or GripWalk boots without inserts are not compatible with this tech binding.

Q: What brake width should I choose?
A: Aim for a brake equal to or up to ~15 mm wider than your ski waist. For a 95 mm ski, a 97 or 102 mm brake is typically ideal.

Q: Is the release adjustability like an alpine binding?
A: Yes—lateral and vertical release are adjustable within 4–10. If you need higher settings, consider a model with a wider RV range.

Q: How much boot-sole-length adjustment is there?
A: About 20 mm, accommodating small BSL changes and minor boot swaps without a remount.

Key takeaways

• Light yet complete: 295 g with brakes and a full feature set for touring and confident descents.
• Consistent release: Cam Release plus 12 mm heel elasticity enhances predictability on edge and in chop.
• Flexible fit: broad brake options and 20 mm adjustment keep setups adaptable.