Majesty Havoc 100 Ti — Review

The Majesty Havoc 100 Ti is the planted, stable member of the Havoc 100 family — the version built to charge variable snow, chop and higher speeds rather than to save weight for the skin track. It shares the 100mm waist and freeride shape of its lighter Carbon sibling, but a full-length Titanal metal sheet layered into the construction changes its character completely. Where the Havoc 100 Carbon is quick and tourable, the Ti is damp, composed and hungry for speed. This is a resort and mixed-conditions freeride ski at heart, aimed at skiers who spend most of their days inside the ropes pushing hard across the whole mountain.

It comes in five lengths — 164, 170, 176, 182 and 188cm — so it scales from mid-sized skiers to tall drivers who want a long, stable platform. At the reference 176cm length the sidecut runs 130 / 100 / 115mm with a 21m turn radius, a longer, more open radius that signals a ski happy to run at speed and carve wider arcs rather than pivot in tight bumps.

The defining trait here is damping. A single full-length Titanal sheet adds mass and quiets the ski, so the Havoc 100 Ti should track through chop, crust and cut-up variable snow with the kind of calm that a metal-free build cannot match. The stated weight of around 1820g per ski at 176cm — a meaningful step up from the Havoc 100 Carbon's roughly 1720g — is the price of that composure, and it pays off when the snow gets rough and fast.

The 21m radius points to a ski that comes alive in medium and long-radius turns, holding an edge with authority on firm, variable pistes and carrying speed without deflecting. The semi-hybrid tip rocker with camber underfoot pairs a forgiving, planing shovel with real grip and energy through the belly of the turn, so it engages cleanly on hardpack while staying manageable when the snow softens. This is a ski that rewards a driver who stays forward and commits speed; ridden lazily or slowly, the metal and the longer radius ask more effort to bend than a lighter carbon plank would.

The Havoc 100 Ti is built on Majesty's 4x4 Design Concept, with a tip-to-tail wood core combining poplar and ash for a blend of liveliness and stability. That core is wrapped in triaxial fiberglass and reinforced with a full-length Titanal metal sheet, the single layer of metal that supplies the damping and edge hold that separate the Ti from the Carbon. Semi-cap sidewalls finish the construction, blending the edge grip of a sidewall with the lighter feel of a cap toward the tip and tail.

Geometry at 176cm is 130 / 100 / 115mm with a 21m turn radius, and stated weight is around 1820g per ski at that length. The profile is a semi-hybrid tip rocker with camber. Lengths offered are 164, 170, 176, 182 and 188cm.

The Havoc 100 Ti suits the resort-focused freeride skier who wants a damp, stable one-ski quiver for charging variable snow, and who values composure at speed over low weight. If your days are mostly lift-served and you push hard, this is the pick over the Carbon.

The Nordica Enforcer 99 is the metal-backed all-mountain benchmark it competes with directly, similarly planted and damp. The K2 Mindbender 99Ti, with its Titanal Y-beam, plays burly and directional in the same class. The Head Kore 100 Ti offers a lighter take on a metal-topped all-mountain ski. Within Majesty, the Majesty Havoc 100 Carbon is the lighter, more tourable sibling for skiers who want to earn turns rather than charge the resort.

Pros

• Full-length Titanal sheet delivers genuine damping and composure at speed.
• Strong edge hold through variable snow, chop and crust.
• 21m radius makes it a confident carver in medium and long turns.
• Semi-hybrid tip rocker with camber balances a planing shovel with real grip.
• Five lengths from 164 to 188cm suit a wide range of drivers.

Cons

• The Titanal adds weight, making it far less efficient for touring than the Carbon.
• Demands speed and effort to flex; it rewards a committed, forward driver.
• The 100mm waist and 21m radius mean only average float in deep snow.

Verdict: The Majesty Havoc 100 Ti is the damp, planted version of the Havoc 100, built to charge variable snow, chop and higher speeds at the resort. Its full-length Titanal sheet buys composure and edge hold at the cost of weight and touring efficiency, so it is not the pick for skiers chasing turns uphill. But for a committed resort freeride skier who wants a stable, metal-backed one-ski quiver for the whole mountain, the shape and construction point to a confident, hard-charging ride.