compareall-round alpine binding — din 11–14

squire 11 vs griffon 13

the two bindings

axis breakdown04 axes

  • 01 downhill performance
    leans·griffon 13
  • 02 release / safety
    evenly matched
  • 03 boot compatibility
    leans·griffon 13
  • 04 durability / build
    leans·griffon 13

the verdict

↳ in one line

The Squire 11 is the lighter, easier binding for DIN 3–11; the Griffon 13 adds DIN 13, a 120 mm brake and touring-sole compatibility for stronger skiers.

The Marker Squire 11 and Griffon 13 are neighbours in Marker's alpine range, and the question searchers ask is simple: do I need the Griffon, or is the Squire enough? The answer mostly comes down to your release setting, then to boots and ski width.

DIN range decides first

The Squire 11 runs from DIN 3 to 11. The Griffon 13 runs from 4 to 13. Both overlap across most of the range, so a skier set at 6 or 7 can ride either. The Griffon earns its place when your setting sits at 10 or above, or when you are heavier and ski fast and want headroom. If you are a lighter or progressing skier set in the 3–7 zone, the Squire covers you and the Griffon brings nothing you will use.

Weight and build

The Squire 11 is listed at 820 g per binding (1640 g per pair). The Griffon 13 is around 1030 g per binding, so the Squire saves about 210 g per binding, about 420 g per pair. That comes from lighter parts: the Squire uses Marker's Triple Pivot Light 2 toe and Hollow Linkage 2 heel, which the catalog review credits with an easy step-in, while the Griffon uses a Triple Pivot Elite toe and an Inter Pivot 3 heel with a magnesium heel bracket, built for harder use. Both sit at a low stand height and both have a stainless-steel AFD.

Boots and brakes

The Squire 11 accepts ISO 5355 alpine and ISO 23223 GripWalk soles. The Griffon 13 uses Sole.ID and adds ISO 9523 touring soles, so it is the one to choose if your boot has a touring sole. Brakes: the Squire comes in 90, 100 and 110 mm, the Griffon in 90, 100, 110 and 120 mm. On a ski wider than about 110 mm under foot, only the Griffon offers a brake that fits.

Who should pick which

Pick the Squire 11 if you are a lighter or intermediate skier, your DIN sits below about 9, you ski a normal alpine or GripWalk boot on skis up to around 110 mm wide, and you value low weight and an easy step-in for park and all-mountain laps. Pick the Griffon 13 if your DIN sits at 9 or above, you weigh more or ski harder, you need a 120 mm brake for a wide freeride ski, or you want to use a boot with a touring sole.

specs

squire 11griffon 13
din3-114-13
typeAlpineAlpine
weight820g per binding (1640g per pair)≈1030g per binding (≈2040g per pair)
elastic travelNot publishedToe 52mm / Heel 16mm
brake widths90mm, 100mm, 110mm90mm, 100mm, 110mm, 120mm
boot compat.ISO 5355, ISO 23223 (GripWalk)ISO 5355, ISO 23223 (GripWalk), ISO 9523

common questions03 q&a

  • q01

    What's the difference between Marker Squire 11 and Marker Griffon 13?

    The Squire 11 is the lighter, easier binding for DIN 3–11; the Griffon 13 adds DIN 13, a 120 mm brake and touring-sole compatibility for stronger skiers.

  • q02

    Is the Marker Squire 11 strong enough, or should I step up to the Griffon 13?

    It depends on your DIN setting. The Squire 11 covers DIN 3–11 and the Griffon 13 covers 4–13, so if your shop sets you below about 9 the Squire is enough and saves about 210 g per binding. Step up to the Griffon if your setting is 9 or higher, you need a 120 mm brake, or your boot has a touring sole.

  • q03

    Which is better for downhill skiing performance — Marker Squire 11 or Marker Griffon 13?

    On our scoring, the Marker Griffon 13 leans a bit more capable here than the Marker Squire 11.

Was this page helpful?
↳every comparison links to both full reviews·squire 11 ↗·griffon 13 ↗