griffon 13 vs jester 16
the two bindings
axis breakdown04 axes
- 01 downhill performanceleans·jester 16
- 02 release / safetyevenly matched
- 03 boot compatibilityleans·griffon 13
- 04 durability / buildevenly matched
the verdict
Near-twins with the same boot compatibility and brakes; the real choice is DIN 4–13 on the Griffon versus 6–16 on the Jester, which adds more magnesium for 40 g.
"Griffon vs Jester" is one of the most common Marker questions, and the honest answer is that they are close relatives. Both sit in Marker's freeride alpine line, both use the Sole.ID height-adjustable AFD, both come with 90, 100, 110 and 120 mm brakes, and neither has a walk mode. The decision is mostly about release range.
DIN range is the deciding spec
The Griffon 13 runs from DIN 4 to 13. The Jester 16 runs from 6 to 16. If your shop sets you at 4 or 5, the Jester cannot go that low, so the Griffon is the only choice. If you need 13.5 or more, only the Jester reaches it. In the overlap from 6 to 13, both work, and the question becomes where your number sits inside each range: a setting of 7 is near the bottom of the Jester's range but mid-range on the Griffon, while a setting of 11 or 12 sits near the top of the Griffon and comfortably inside the Jester.
Same layout, different hardware
Both use a Triple Pivot Elite family toe and an Inter Pivot 3 heel. The Jester 16 is listed with magnesium, stainless-steel and composite parts; the Griffon 13 with a magnesium heel bracket, a stainless-steel AFD and a composite, metal-reinforced chassis. The site's review text describes the Jester as stiffer and more metallic in feel, built for aggressive freeride and big landings, and the Griffon as the all-mountain workhorse in the middle of Marker's range.
Weight and boots
The difference in weight is small: the Griffon 13 is around 1030 g per binding and the Jester 16 is 1070 g per binding, about 40 g each. Boot compatibility is the same on paper: ISO 5355 alpine, ISO 23223 GripWalk and ISO 9523 touring soles, via Sole.ID. So neither boots, brakes nor weight should push you one way; your skier profile should.
Who should pick which
Pick the Griffon 13 if you are an intermediate to advanced skier, your DIN sits roughly between 5 and 10, and you ski groomers, side hits and some park. Pick the Jester 16 if you are a heavier or expert skier, your setting sits at 10 or above, you hit bigger features or ski fast in rough snow, and you want release-range headroom above 13. If you are unsure, ask the shop that sets your DIN which number they would use, then pick the binding where that number is not at the bottom of the scale.
specs
common questions03 q&a
- q01
What's the difference between Marker Griffon 13 and Marker Jester 16?
Near-twins with the same boot compatibility and brakes; the real choice is DIN 4–13 on the Griffon versus 6–16 on the Jester, which adds more magnesium for 40 g.
- q02
Is the Jester 16 just a Griffon 13 with a stronger spring?
Largely, on paper. Both share Sole.ID, the same brake widths and an Inter Pivot 3 heel, and retailers describe the Griffon as using the same toe and heel design with a smaller spring and lighter materials. The practical differences are the release range (DIN 6–16 versus 4–13), more magnesium and stainless parts on the Jester, and about 40 g per binding.
- q03
Which is better for downhill skiing performance — Marker Griffon 13 or Marker Jester 16?
On our scoring, the Marker Jester 16 leans a bit more capable here than the Marker Griffon 13.