freeflex 14 vs protector+ freeflex 14 gw
the two bindings
axis breakdown04 axes
- 01 downhill performanceevenly matched
- 02 release / safetyleans·protector+ freeflex 14 gw
- 03 boot compatibilityevenly matched
- 04 durability / buildevenly matched
the verdict
Both are DIN 4–14 Freeflex race bindings that take GripWalk; the new Protector+ version adds Tyrolia's Full Heel Release, a heel that can also release sideways.
If you are comparing the Tyrolia Freeflex 14 with the Freeflex 14 GW, the binding to know about is the new Protector+ Freeflex 14 GW, a 26-27 model. The "GW" label alone is not the difference here: the Freeflex 14 in our catalog also takes GripWalk (ISO 23223) and ISO 5355 alpine soles. The real difference is the heel.
Same DIN, same race intent
Both release from 4 to 14 and both are race-style alpine bindings for hard snow, built around the Freeflex idea: the heel can move as the ski bends, so the binding interferes less with the ski's natural flex. Neither has a touring mode, and both use an 85 mm brake as standard. On release range and target skier, the two are the same choice.
The Protector heel is what you pay for
The Protector+ Freeflex 14 GW uses Tyrolia's FHR (Full Heel Release) heel. HEAD describes it as bringing that technology to the racing segment for the first time. A conventional alpine heel releases upward; the Protector heel can also release laterally. The catalog lists 7 mm of lateral heel elasticity before that rotation starts. HEAD cites University of Innsbruck computer simulations of backward twisting falls, the fall pattern linked to ACL injuries, as the basis for the design. Those are simulations, not injury statistics, but they are the reason this binding exists. The regular Freeflex 14 heel releases in the traditional way.
Stand height, weight and the unknowns
The catalog lists the Protector+ Freeflex at a 21 mm stand height, down from about 34 mm on the original Protector Freeflex, which matters for edge feel on a race ski. The Freeflex 14's weight is listed at about 1,325 g per binding, with figures that vary by listing; Tyrolia has not yet published a weight for the Protector+ version. As a new product it also has no long-term durability record yet, while the Freeflex 14 is the established model.
Which one to pick
Pick the Freeflex 14 if you want the proven race binding in the 4–14 range, with a known weight and a traditional heel feel. Pick the Protector+ Freeflex 14 GW if you carve fast on frontside or GS-style skis, care about knee protection in backward twisting falls, and accept a newer design whose weight and long-term record are still to be published.
specs
common questions03 q&a
- q01
What's the difference between Tyrolia Freeflex 14 and Tyrolia Protector+ Freeflex 14 GW?
Both are DIN 4–14 Freeflex race bindings that take GripWalk; the new Protector+ version adds Tyrolia's Full Heel Release, a heel that can also release sideways.
- q02
Does the Protector+ Freeflex 14 GW feel different from the regular Freeflex 14 when carving?
On paper the release range (DIN 4–14), the Freeflex heel movement and the 85 mm standard brake are the same. The heel is different: the Protector+ heel has 7 mm of lateral elasticity before its sideways release engages, which a traditional heel does not offer. The catalog lists it at a 21 mm stand height; Tyrolia has not yet published its weight, so a direct weight comparison is not possible yet.
- q03
Which is better for release reliability — Tyrolia Freeflex 14 or Tyrolia Protector+ Freeflex 14 GW?
On our scoring, the Tyrolia Protector+ Freeflex 14 GW leans a bit more capable here than the Tyrolia Freeflex 14.